Soft-face hammer Halder SIMPLEX soft-face hammer Series 3001
Simplex soft-face hammer series 3001 Halder
SFTFCEHAM-HALDER-3001.060-SIMPLEX-D60
Register now and access more than 125,000 products
The series 3001 SIMPLEX soft-face hammer is equipped with the blue TPE soft insert (series 3201) on both sides. This is the softest insert in the SIMPLEX series and has a strong damping effect, making it suitable for sensitive work. Compared to the conventional rubber hammer, it does not leave behind any unwanted black abrasion marks.
The housing made of malleable iron has an integrated protective shaft sheath that ensures high breakage resistance.
The high-quality, vibration-damping, ergonomically shaped wooden handle is double-painted in the grip area and therefore dirt-resistant.
In accordance with the clever SIMPLEX principle, all components can be replaced and retrofitted. This not only saves money, but also resources.
This design is available from sizes D30 mm to D60 mm.
Datasheets(X)
For very sensitive materials, laying tiles/panels, setting natural stone, furniture construction, dry walling, window/door construction, joinery
Hammer head insert diameter (Ø) | 60 mm |
Material of long handle | Wood |
Length of handle | 335 mm |
Length | 405 mm |
Last viewed
GPN 280 end cap Polyethylene (PE-LD), black
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 8.8, zinc-plated thick-film passivated (ZSML)
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Flat Washers
Fabric mounting tape for interior use rust-proof, no sharp edges
Countersunk tapping screw, shape C with slot DIN 7972, steel, zinc-plated (A2K)
Neon high-visibility T-shirt, class 2
Extension EN1254, gunmetal, 3526
Work trousers
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)