Soft-face hammer Halder SIMPLEX soft-face hammer Series 3002
Simplex soft-face hammer series 3002 Halder
SFTFCEHAM-HALDER-3002.060-SIMPLEX-D60
Register now and access more than 125,000 products
The series 3002 SIMPLEX soft-face hammer is equipped with a rubber composition hammer insert on both sides. This medium-hard rubber insert (series 3202) is an absolute best seller. It is very low-wear, damping and odour-neutral and has a much longer service life than a conventional rubber hammer.
The housing made of malleable iron has an integrated protective shaft sheath that ensures high breakage resistance.
The high-quality, vibration-damping, ergonomically shaped wooden handle is double-painted in the grip area and therefore dirt-resistant.
In accordance with the clever SIMPLEX principle, all components can be replaced and retrofitted.
This version is available from sizes D30 mm to D80 mm.
Datasheets(X)
Gardening/landscaping, paving work, setting kerbstones, setting masonry/stairs, fencing, scaffolding, tents, prefabricated house construction, carpentry, maintenance/repair work
Material of long handle | Wood |
Length of handle | 335 mm |
Length | 405 mm |
Hammer head insert diameter (Ø) | 60 mm |
Last viewed
Combination wrench, inch
Stud with threaded end ≈ 1.25 d
Safety boots, S3
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
90° angled bulkhead fitting ISO 8434-1, stainless steel 1.4571
Hexalobular screw with flattened half round head
Hexagon socket screw-in nut with collar
Standard cable tie with plastic latch
Three prong knob with insert nut Full hub