Soft-face hammer Halder SIMPLEX soft-face hammer Series 3702
Simplex soft-face hammer series 3702 Halder
SFTFCEHAM-HALDER-3702.050-SIMPLEX-D50
Art.-no. 1971008554
EAN 4030618303381
Register now and access more than 125,000 products
The series 3702 SIMPLEX soft-face hammer is equipped with a rubber composition hammer insert on both sides. This medium-hard rubber insert is very low-wear, damping and odour-neutral and has a much longer service life than a conventional rubber hammer.
- Reinforced malleable iron housing with high level of stability increases impact force due to the increased weight.
- Very stable, durable fibreglass handle with non-slip grip, inorganic (not sensitive to moisture).
- All parts can be replaced/retrofitted
Datasheets(X)
Gardening/landscaping, paving work, setting kerbstones, setting masonry/stairs, fencing, scaffolding, tents, prefabricated house construction, carpentry, maintenance/repair work
Hammer head insert diameter (Ø) | 50 mm |
Material of long handle | Fibreglass |
Length of handle | 267 mm |
Length | 330 mm |
Last viewed
Hexagonal bolt with flange in accordance with MBN standard
Hexagonal bolt with thread up to the head ISO 4017, silver zinc-nickel plated 8.8 steel (ZNSHR)
Feather key, high shape DIN 6885, steel, plain, shape B
VS ENVI Flex and VS ENVI Flex Pro recycling system
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
Wire end ferrule with plastic sleeve box type 1
Star-shaped handle with connector and male thread
Tapping screw, countersunk head DIN 7982, zinc-plated steel, blue passivated (A2K), TX, shape C
Slotted flat-head screw ISO 1580, A4 stainless steel, plain
Wire end ferrule without plastic sleeve DIN 46228 Part 1