Soft-face hammer Halder SIMPLEX soft-face hammer Series 3714
Simplex soft-face hammer series 3714 Halder
SFTFCEHAM-HALDER-3714.040-SIMPLEX-D40
Register now and access more than 125,000 products
The blue TPE-soft insert is the softest insert, has a strong damping effect and is therefore suitable for sensitive work. Compared to a conventional rubber hammer, it does not leave behind any black abrasion marks. The copper insert is the hardest hammer insert and enables very high impact forces, despite being more gentle than a steel hammer. It replaces the use of a conventional copper hammer.
- Reinforced malleable iron housing with high level of stability increases impact force due to the increased weight.
- Very stable, durable fibreglass handle with non-slip grip, inorganic (not sensitive to moisture).
- All parts can be replaced/retrofitted
Datasheets(X)
Gardening/landscaping, laying tile/slabs, setting natural stone, dry walling, straightening, plant construction, sheet metal processing, furniture construction, window/door construction, joinery, assembly/repair work in the automotive/commercial vehicles sector, servicing, repair, maintenance
Hammer head insert diameter (Ø) | 40 mm |
Material of long handle | Fibreglass |
Length of handle | 267 mm |
Length | 330 mm |
Last viewed
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Counter nut, brass PG
3/4 inch grooved nut wrench basic body For removal and installation work on the rear axle
System case 8.4.2
Parallel pin, unhardened ISO 2338 steel plain (m6)
Bow handle
Work shorts
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Round head screw with square neck
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262