Soft-face hammer Halder SIMPLEX soft-face hammer Series 3728
Simplex soft-face hammer series 3728 Halder
SFTFCEHAM-HALDER-3728.080-SIMPLEX-D80
Register now and access more than 125,000 products
- SIMPLEX soft-face hammer with insert combination rubber composition (black, medium-hard, damping, odour-neutral, low-wear)/nylon (white, hard, highly wear-resistant, no splintering even at sub-zero temperatures, resistant to oil and grease).
- Reinforced malleable iron housing with high level of stability increases impact force due to the increased weight.
- Very stable, durable fibreglass handle with non-slip grip, inorganic (not sensitive to moisture).
- All parts can be replaced/retrofitted
Datasheets(X)
Assembling sharp-edged workpieces, housing assembly, plant construction, hall construction, steel construction
Material of long handle | Fibreglass |
Length of handle | 400 mm |
Length | 497 mm |
Hammer head insert diameter (Ø) | 80 mm |
Last viewed
Safety boots, S3
Threaded fitting
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Work dungarees Stretch X
HSCo8 end mill, short, centre-cutting DIN 844K
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Safety boots, S3
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with metallic sealing edge, shape B
Designer furniture handle D handle, round