Soft-face hammer Halder SIMPLEX soft-face hammer Series 3768
Simplex soft-face hammer series 3768 Halder
SFTFCEHAM-HALDER-3768.040-SIMPLEX-D40
Register now and access more than 125,000 products
- SIMPLEX soft-face hammer with insert combination plastic (red, hard, oil- and grease-resistant)/nylon (white, hard, very wear resistant, no chipping even at temperatures below zero, oil- and grease-resistant).
- Reinforced malleable iron housing with high level of stability increases impact force due to the increased weight.
- Very stable, durable fibreglass handle with non-slip grip, inorganic (not sensitive to moisture).
- All parts can be replaced/retrofitted
Datasheets(X)
Scaffolding, tents, hall construction, steel construction, exhibition stand construction, joining workpieces, assembling sharp-edged workpieces, housing assembly, mould making, plant construction, sheet metal machining, fabricated house construction, joinery, assembly/repair work on vehicles/commercial vehicles, servicing, repair, maintenance
Material of long handle | Fibreglass |
Length of handle | 267 mm |
Length | 330 mm |
Hammer head insert diameter (Ø) | 40 mm |
Last viewed
Protective apron
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut TiCN
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Slotted set screw with pin DIN 417, steel, 14H, plain
Work shirt TJ520
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hook spindle
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)