Soft-face hammer Halder SIMPLEX soft-face hammer Series 3789
Simplex soft-face hammer series 3789 Halder
SFTFCEHAM-HALDER-3789.050-SIMPLEX-D50
Register now and access more than 125,000 products
- SIMPLEX soft-face hammer with insert combination nylon (white, hard, very wear-resistant, no chipping even at temperatures below zero, oil- and grease-resistant)/soft metal (silver-coloured, hard, heat-resistant).
- Reinforced malleable iron housing with high level of stability increases impact force due to the increased weight.
- Very stable, durable fibreglass handle with non-slip grip, inorganic (not sensitive to moisture).
- All parts can be replaced/retrofitted
Datasheets(X)
Hall construction, steel construction, trade fair construction, joining workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, mould making, plant construction, sheet metal processing, assembly/repair work in the automotive/commercial vehicles sector, servicing, repair, maintenance
Hammer head insert diameter (Ø) | 50 mm |
Material of long handle | Fibreglass |
Length of handle | 267 mm |
Length | 300 mm |
Last viewed
Pipe cable lug Without inspection hole
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Article sticker
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
Disposable protective glove Nitras High Risk Nitrile 8065
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Winter jacket One
Ducting clamp Part 2 – Heavy series