Soft-face hammer Halder SIMPLEX soft-face hammer series 3003
Simplex soft-face hammer series 3003 Halder
SFTFCEHAM-HALDER-3003.050-SIMPLEX-D50
Register now and access more than 125,000 products
The series 3003 SIMPLEX soft-face hammer is equipped with a TPE-mid hammer insert on both sides. This medium-hard grey insert (series 3203) allows a similar impact force to the black rubber composition insert (series 3202). However, no unwanted black abrasion marks are left behind.
The housing made of malleable iron has an integrated protective shaft sheath that ensures high breakage resistance.
The high-quality, vibration-damping, ergonomically shaped wooden handle is double-painted in the grip area and therefore dirt-resistant.
In accordance with the clever SIMPLEX principle, all components can be replaced and retrofitted.
This version is available from sizes D30 mm to D60 mm.
Datasheets(X)
For delicate materials, setting natural stone, dry walling, furniture construction, laying tile/slabs, paving work, setting masonry/stairs, window/door construction, joinery
Hammer head insert diameter (Ø) | 50 mm |
Material of long handle | Wood |
Length of handle | 310 mm |
Length | 350 mm |
Last viewed
Work dungarees
Threaded rod DIN 976, A2-70 stainless steel, shape A
Bolt with head ISO 2341, shape B, A2 stainless steel, plain
Leaf springs Sundström R06-0806
Lock plate
Low-cut safety shoes, S3
Roofing screw with hexagon head and drill tip
O-ring, metric
Banjo bolt DIN 7643, steel, zinc-nickel silver-plated (ZNSHL), short version
Hexagon shoulder screw with long threaded pin DIN 609, steel 8.8, plain