Soft-face hammer Halder Supercraft soft-face hammer Series 3366
Supercraft soft-face hammer series 3366 Halder
SFTFCEHM-HALDER-3366.025-SUPERCRAFT-D25
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT soft-face hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT soft-face hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Completely robot-welded.
- Vibration-damping, ergonomically shaped, highly robust and painted hickory handle.
- Protective shaft sheath prevents missed strikes.
- Long handle and hammer inserts can be replaced
Datasheets(X)
Positioning and joining workpieces in the vice, sheet metal machining, assembling sharp-edged workpieces, assembly/repair work on vehicles/commercial vehicles, scaffolding, straightening, housing assembly, plant construction, maintenance tasks
Hammer head insert diameter (Ø) | 25 mm |
Material of long handle | Hickory |
Material of hammer head insert | Nylon |
Length of handle | 280 mm |
Length | 304 mm |
Last viewed
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 8.8, zinc-plated thick-film passivated (ZSML)
Metal core drill bit Ruko HSS TiAlN Weldon holder
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
SAE J78 sst 410 plain hex head flanged
Slotted countersunk head screw DIN 963, brass, nickel-plated (E2J)
TIME-SERT® seat cutter
Flat chisel For pneumatic chipping hammers
Flat washers with large external diameter
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Hexagonal bolt with shank