Soft-face hammer Halder Supercraft soft-face hammer Series 3366
Supercraft soft-face hammer series 3366 Halder
SFTFCEHM-HALDER-3366.035-SUPERCRAFT-D35
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT soft-face hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT soft-face hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Completely robot-welded.
- Vibration-damping, ergonomically shaped, highly robust and painted hickory handle.
- Protective shaft sheath prevents missed strikes.
- Long handle and hammer inserts can be replaced
Datasheets(X)
Positioning and joining workpieces in the vice, sheet metal machining, assembling sharp-edged workpieces, assembly/repair work on vehicles/commercial vehicles, scaffolding, straightening, housing assembly, plant construction, maintenance tasks
Hammer head insert diameter (Ø) | 35 mm |
Material of long handle | Hickory |
Material of hammer head insert | Nylon |
Length of handle | 300 mm |
Length | 338 mm |
Last viewed
Dry sandpaper strips
Blade scraper set 52 pieces
Hexagon Socket Head Cap Screw
ASME B18.21.1 stainless steel 410 plain
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
TIME-SERT® threaded bushing
ASME B18.21.1 steel zinc-plated
Work trousers
Short sanding belt Klingspor LS 309 XH
Taper-grooved dowel pin ISO 8745 steel plain