Soft-face hammer Halder Supercraft soft-face hammer Series 3366
Supercraft soft-face hammer series 3366 Halder
SFTFCEHM-HALDER-3366.050-SUPERCRAFT-D53
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT soft-face hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT soft-face hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Completely robot-welded.
- Vibration-damping, ergonomically shaped, highly robust and painted hickory handle.
- Protective shaft sheath prevents missed strikes.
- Long handle and hammer inserts can be replaced
Datasheets(X)
Positioning and joining workpieces in the vice, sheet metal machining, assembling sharp-edged workpieces, assembly/repair work on vehicles/commercial vehicles, scaffolding, straightening, housing assembly, plant construction, maintenance tasks
Hammer head insert diameter (Ø) | 53 mm |
Material of long handle | Hickory |
Material of hammer head insert | Nylon |
Length of handle | 315 mm |
Length | 364 mm |
Last viewed
Compression cable lug DIN 46235
Hexagonal nut, low profile ISO 4035 steel 04, hot-dip galvanised (HDG)
Work trousers
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
Offset steel door split spindle 10 mm with M12 threaded roller
Hexagon Socket Head Cap Screw
Trousers Stretch X
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Nature work shirt