Soft-face hammer Halder Supercraft soft-face hammer Series 3377
Supercraft soft-face hammer series 3377 Halder
SFTFCEHM-HALDER-3377.040-SUPERCRAFT-D40
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Break-proof steel tube handle and ergonomically shaped, non-slip rubber grip.
- Completely robot-welded.
- Interchangeable hammer inserts.
- Durable powder coating protects against corrosion.
Datasheets(X)
Assembly/repair work on vehicles/commercial vehicles, positioning and joining workpieces, assembling sharp-edged workpieces, straightening, housing assembly, plant construction, maintenance tasks, sheet metal machining
Hammer head insert diameter (Ø) | 40 mm |
Material of long handle | Steel |
Material of hammer head insert | Nylon |
Length | 300 mm |
Last viewed
Trough panel plug-in wall
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
T-piece, reduced with solder connection EN1254, copper, 5130R
Adhesive lubricant HHS® 5000
Textile protective glove Ejendals TEGERA® 767
Twist drill bit HSCo DIN 338 type RN bronze point thinning
O-ring, metric
PKD-S diamond socket cutter
Twist drill bit HSS DIN 338 type RN 130°