Soft-face hammer Halder Supercraft soft-face hammer Series 3377
Supercraft soft-face hammer series 3377 Halder
SFTFCEHM-HALDER-3377.045-SUPERCRAFT-D45
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Hammer inserts made of special nylon with maximum strength.
- Break-proof steel tube handle and ergonomically shaped, non-slip rubber grip.
- Completely robot-welded.
- Interchangeable hammer inserts.
- Durable powder coating protects against corrosion.
Datasheets(X)
Assembly/repair work on vehicles/commercial vehicles, positioning and joining workpieces, assembling sharp-edged workpieces, straightening, housing assembly, plant construction, maintenance tasks, sheet metal machining
Hammer head insert diameter (Ø) | 45 mm |
Material of long handle | Steel |
Material of hammer head insert | Nylon |
Length | 305 mm |
Last viewed
Sidewall lining
Hexagon Socket Head Cap Screw
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
90° elbow, reduced with female thread EN10242 A1, hot-dip galvanised malleable iron
Plus Quadro-L hammer drill bit
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Work coat
GPN 630 handle bar plug Thermoplastic polyolefin elastomer (TPE), free from plasticisers, black
Flat washer with chamfer ISO 7090, steel, 200 HV, zinc-nickel-plated black (ZFSH)
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised