Soft-face hammer Halder Supercraft soft-face hammer Series 3389
Supercraft soft-face hammer series 3389 Halder
SFTFCEHM-HALDER-3389.060-SUPERCRAFT-D60
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT soft-face hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT soft-face hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Replaceable hammer inserts made of special nylon with maximum strength.
- Break-proof, non-slip 3-component handle with fibreglass core
- Completely robot-welded.
- Available in sizes D40 mm to D60 mm
Datasheets(X)
Assembly/repair work on vehicles/commercial vehicles, positioning and joining workpieces, assembling sharp-edged workpieces, straightening, housing assembly, plant construction, maintenance tasks, sheet metal machining
Hammer head insert diameter (Ø) | 60 mm |
Material of long handle | Three-component plastic |
Material of hammer head insert | Nylon |
Length | 392 mm |
Last viewed
Logo IV work T-shirt
Eye bolt with full thread DIN 444, steel 8.8, zinc-plated, blue passivated (A2K), shape LB
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3016
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032
Diamond cutting disc Klingspor grout removal tool DN 600 U Supra
Ring bolt H.Q.E. with variable screw length
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
SNAP marker
Jacket Planam MG 260