Soft-face hammer Halder Supercraft soft-face hammer Series 3399
SFTFCEHM-HALDER-3399.050-SUPERCRAFT-D50
Art.-no. 1971015539
EAN 4068362604409
Register now and access more than 125,000 products
The head tube of the SUPERCRAFT soft-face hammer is filled with steel shot. This causes the shot filling to follow with a delay when the impact surface hits the workpiece. The reduced rebound makes optimum use of the impact energy. This allows for very powerful impacts. In addition, working with SUPERCRAFT soft-face hammers is much safer, gentler on the joints and quieter than with ordinary steel hammers.
- Replaceable hammer inserts made of special nylon with maximum strength.
- Break-proof, non-slip 3-component handle with fibreglass core
- Completely robot-welded.
Datasheets(X)
Assembly/repair work on vehicles/commercial vehicles, positioning and joining workpieces, assembling sharp-edged workpieces, straightening, housing assembly, plant construction, maintenance tasks, sheet metal machining
Hammer head insert diameter (Ø) | 50 mm |
Material of long handle | Three-component plastic |
Material of hammer head insert | Nylon |
Length of handle | 354 mm |
Length | 354 mm |
Last viewed
Plastic threaded plug GPN 700
Bevelled-edge chisel
Ear protection, re-usable uvex high-fit u-cut FC otoplastic
Open-end plug-in torque wrench head drive Stahlwille 731a/40
Hexagon bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Hexagon bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
3KS Plus profile thumbturn cylinder for keyed alike profile cylinders in original equipment
Insulated butt connector, easy entry
Saddle washer for trapezoidal profile
Vulcanised fibre disc VSM XF885