Soft solder paste no. 30 With brush

Name: Soft solder paste no. 30 With brush
Brand: Würth
SKU: 0987130

Soft solder paste no. 30 with brush
SFTSLDRPAST-NO30-BRUSH-250G

Art.-no. 0987130

EAN 4011231896184

All versions

Prices for customers after login

Soft solder paste no. 30 With brush

Art.-no. 0987130

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Flux DIN EN 29454-1/3.1.1.C

Solder S-Sn 97 Cu 3 DIN EN ISO 9453 (content 60% by weight)

Residues are soluble in cold water

Notice

The flux residues are corrosive and must be removed from the outside by wiping and from the inside by flushing.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Ready-to-use soft solder paste for pre-tinning and soft soldering in copper pipe installation in conjunction with fitting solder. Suitable for cold and hot water installations with copper pipes according to DVGW/GW 2 and GW 7

Instructions

Using the brush, apply the soft solder paste to the surfaces cleaned beforehand with cleaning fleece. Bring the solder joint evenly to the working temperature (approx. 300ºC) and then add the fitting solder. The soldering work can be carried out by means of flame or resistance heating.

Weight of content	250 g
Colour	Grey
Material designation	S-Sn97Cu3
Shelf life from production	24 Month
EN standard	29453 29454-1
DIN	1707 8511
pH value	7
Min. flashing point	135 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.