Soft support Mirka soft support for sanding disc
Soft support for sanding disc Mirka
INTERFACE-MIRKA-8295530111-125MM-10MM
Register now and access more than 125,000 products
Particularly suitable for the finest sanding work and contour grinding, prevents over-grinding.
The soft support is placed between the abrasive plate and the sanding disc.
Datasheets(X)
Diameter | 125 mm |
Colour | Black |
Hole pattern | 33-hole |
Thickness | 10.0 mm |
Material | 0 - not applicable |
Last viewed
Hose clamp with corrugated spring
Wad punch For round eyelets
GPN 250 pipe protective cap Polyethylene (PE-LD/PE-LLD), yellow
Twist drill bit HSCo DIN 338 type RN MAGMA
Cutter knife Martor Argentax Cuttex 18MM 46200
Divider set, flat for workshop trolleys in system dimension 8.4
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Low-cut safety shoes, S1P
Taper-grooved dowel pin ISO 8745 steel plain
Blind rivet, flat head