Solar double pipe clamp
Double pipe clamp solar
DBPIPCLMP-F.CORPIP-PA-BLCK
Register now and access more than 125,000 products
Through hole
Easy to install using anchors and screws
Minimal clamping range
Clean appearance, minimal pressing in of insulation
> 60 mm.
Datasheets(X)
For installing the solar stainless steel corrugated double-pipe system or individual lines installed in parallel that are insulated with Flexen insulated rubber tube (total outside diameter greater than 60 mm)
To install the solar double pipe clamp, use 6 mm screw with large disk head (at least 13 mm diameter), but not a countersunk head!
 | |
Material | PA - Polyamide |
Colour | Black |
Max. temperature resistance | 200 °C |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Thin-walled heat-shrink hose Without internal adhesive
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Threaded pipe fittings
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3002
Metal core drill bit Ruko solid carbide Tecrona Weldon holder
Hexagonal nut ISO 4032 polyamide 6.6, natural
Bolt without head ISO 2340 shape A, steel plain
Jacket Planam Highline
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)