Solar stainless steel corrugated pipe
Stainless steel corrugated pipe solar
CORPIP-SST-PREINSULATED-DN20-DD20-L25M
Register now and access more than 125,000 products
- Temperature resistant up to +220° C
- Building material class B1 = flame-retardant
- The loss of heat corresponds to the two individually installed pipelines, which are 100% EnEV-insulated
- The flexible insulation can also be adapted to difficult installation conditions
- Can be bent by hand, though still robust and kink-resistant
- Easy and secure creation of a connection with plug-in screw connection or shaping device
- Already equipped with union nut on one end
- Tear-resistant, UV-resistant outer skin
- On rolls (up to 40 m). Can be shortened to individual lengths, less wastage
Datasheets(X)
For piping in indoor and outdoor thermal solar installations
Material | Stainless steel A2, 1.4301 |
Insulating material | PES fleece |
Material of outer layer | PE - Polyethylene |
Colour | Black |
DN nominal width | DN 20 |
Insulation thickness x roll length | 20 mm x 25 m |
Length of roll | 25 m |
Min./max. temperature resistance | -60 to 220 °C |
Max. short-term temperature resistance | 230 °C |
Heat conductance λ | 0.040 W/(m*K) |
Heat conductance λ conditions | at 40°C average temperature |
Building material class | B1 - Of low flammability |
Building material class conditions | in accordance with DIN 4102 |
Max. operating pressure | 18 bar |
Conditions for operating pressure | at 20°C medium temperature |
Bending radius | 30 mm |
Ultraviolet resistance | Yes |
Wall thickness | 0.3 mm |
Internal diameter (d1) | 19.7 mm |
Outer diameter (d2) | 25 mm |
Height (H) | 65 mm |
Width (B) | 113 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!