Solid carbide metal twist drill bit Ruko DIN 338 type N Tecrona
Twist drill solid carbide DIN 338 Tecrona Ruko
DRL-RUKO-815125C-DIN338-TECRONA-12,5
Register now and access more than 125,000 products
Powerful twist drill bit with soldered-in carbide cutting plates made of K20 fine grain material which is suitable for universal use and for high-strength steels. Drilling in high-strength steels only with constant cooling.
Datasheets(X)
Especially suitable for the machining of cast iron.
Max. drilling depth (D) | 5xD |
Cutting material | Carbide |
Diameter (d1) | 12.5 mm |
Length (l1) | 151 mm |
Chip flute length (l2) | 101 mm |
Shank diameter (d2) | 12.5 mm |
Last viewed
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Hexagonal bolt with flange in accordance with MBN standard
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Cutting disc Klingspor A 24 N Supra
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Shim ring DIN 988, steel, plain
Pull handle ST/A210
Pan head screw with H cross recess DIN 7985, A4 stainless steel, plain
Sandpaper strip Useit® Superpad vehicle
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)