Solid carbide metal twist drill bit Ruko DIN 338 type N Tecrona
Twist drill solid carbide DIN 338 Tecrona Ruko
DRL-SPRL-RUKO815110C-DIN338-TECRONA-D11
Register now and access more than 125,000 products
Powerful twist drill bit with soldered-in carbide cutting plates made of K20 fine grain material which is suitable for universal use and for high-strength steels. Drilling in high-strength steels only with constant cooling.
Datasheets(X)
Especially suitable for the machining of cast iron.
Max. drilling depth (D) | 5xD |
Cutting material | Carbide |
Diameter (d1) | 11.0 mm |
Length (l1) | 142 mm |
Chip flute length (l2) | 94.0 mm |
Shank diameter (d2) | 11.0 mm |
Last viewed
Safety sandals, S1
THM 413 holding magnet
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Arm guard W-290 Level C
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
C 6.3 TX bit (1/4 inch)
Safety boots, S3
Cleaning set for paint spray gun 14 pieces
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Raised contersunk head tapping screw, shape C with slot DIN 7973, A2 stainless steel, plain