Solid carbide metal twist drill bit Ruko DIN 338 type N TiAlN
Twist drill bit SC DIN 338 TiAlN Ruko
DRL-SPRL-RUKO-814115-DIN338-TIALN-D11,5
Register now and access more than 125,000 products
Powerful fine grain twist drill bit made of K 20 solid carbide for universal use.
Particularly suitable for high-strength steels at high cutting speeds.
Surface | TiAlN |
Max. drilling depth (D) | 5xD |
Cutting material | Carbide |
Diameter (d1) | 11.5 mm |
Length (l1) | 142 mm |
Chip flute length (l2) | 94.0 mm |
Shank diameter (d2) | 11.5 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Slotted flat-head screws with small head DIN 920, steel 5.8, zinc-plated, blue passivated (A2K)
Castellated nut, low profile with fine thread DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)
Shower hose
Safety sandals S1
Inside drawer For system hinged door cabinet
New generation of Tipmatic unit for Dynapro soft-close full-extension slide
Adapter plate, round for quick-action clamps
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
