Spacer/door sign holder type 1
Spacer for door type 1
SPCE-TYPE1-LARGE-INOX-D18MM
Art.-no.
0590930022
EAN 4048539828333
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Mounting system that can be used both for door signs and for covers in store and trade fair construction.
- Two-piece, visually appealing mounting system. Using stainless steel or plastic pipes, users can produce simple spacers to achieve individual wall spacing or compensate for uneven areas on walls. Broken recesses at holes drilled for signs are concealed by large head pieces.
- Simple mounting with parts that can be screwed into each other
- Sign is not scratched during mounting
- Protection against theft and vandalism with left-hand thread on head pieces
Specified dimensions not binding. Subject to technical changes!
Product information
Datasheets(X)
 | |
Head diameter (B) | 18 mm |
Material | Stainless steel |
Surface | Stainless steel FINISH |
Last viewed
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Spacer stud, polyamide, hex, F/M
EPS profile thumbturn cylinder
VARIFIX® c-assembly rail 41/22
E90 fire protection duct end cap
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Clamping pin/clamping sleeve
RW® bit
Work jacket
Wood screw, DIN 95 brass Raised countersunk head, slotted