Spacer/door sign holder type 1
Spacer for door type 1
SPCE-TYPE1-MEDIUM-(CR)-D14MM
Register now and access more than 125,000 products
- Two-piece, visually appealing mounting system. Using stainless steel or plastic pipes, users can produce simple spacers to achieve individual wall spacing or compensate for uneven areas on walls. Broken recesses at holes drilled for signs are concealed by large head pieces.
- Simple mounting with parts that can be screwed into each other
- Sign is not scratched during mounting
- Protection against theft and vandalism with left-hand thread on head pieces
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Head diameter (B) | 14 mm |
Material | Brass |
Surface | Chrome plated |
Last viewed
Carbide taper tap
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S1
Hard hat, accessories
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-80 stainless steel, plain
Jacket Planam Plaline
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)
1/2 inch socket wrench insert metric, hexagon, short