Spacer washer
Spacer steel plain tolerance according to DIN 522
DISC-SPCE-TOLDIN522-A-28X40X1,0
Register now and access more than 125,000 products
Spacer washers/compensating discs are used to easily balance out existing tolerances when positioning and securing a shaft, an axle or other machine parts. They can also be used as shim rings to minimise the normal movement play caused by the production tolerances of retaining rings and rivets.
The item number indicates: 0420 10 203
- >Prefix number
- >Internal diameter
- >Outer diameter
- The last digit is the thickness:
>>2=0.2 mm, 3=0.3 mm, 5=0.5 mm, 1=1.0 mm
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 420 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Internal diameter (d1) | 28 mm |
Outer diameter (d2) | 40 mm |
Thickness (h1) | 1 mm |
Last viewed
Work trousers
Insoles in 3 widths
Hexagon nut, low profile, with clamping piece (non-metal insert)
Cetus trousers with holster pockets
Vulcanised fibre disc VSM KF708
Hexagonal bolt
Hexagon Socket Head Cap Screw
Wooden shaft, conical With ground cone and rounded shaft end
EPS profile thumbturn cylinder
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive