Spacer washer
Spacer steel plain tolerance according to DIN 522
DISC-SPCE-TOLDIN522-A-32X44X1,0
Register now and access more than 125,000 products
Spacer washers/compensating discs are used to easily balance out existing tolerances when positioning and securing a shaft, an axle or other machine parts. They can also be used as shim rings to minimise the normal movement play caused by the production tolerances of retaining rings and rivets.
The item number indicates: 0420 10 203
- >Prefix number
- >Internal diameter
- >Outer diameter
- The last digit is the thickness:
>>2=0.2 mm, 3=0.3 mm, 5=0.5 mm, 1=1.0 mm
Datasheets(X)
CAD data (available after login)
 | |
Standards | WN 420 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Internal diameter (d1) | 32 mm |
Outer diameter (d2) | 44 mm |
Thickness (h1) | 1 mm |
Last viewed
HSCo8 end mill, short, centre-cutting DIN 844K
REDOSLIDE Z60-H/Z60-HW interior sliding door fitting For ceiling and wall mounting for wooden doors
Hexagonal bolt with flange in accordance with MBN standard
Skin protection lotion Ultra
System case empty range 4.4.1
Flat chisel In line with DIN 6453
Pre-charged NiMH battery
System case 4.4.1
Safety goggles Spica®
Blind rivet dome head A2/A2 1379 pcs SYSKO