Spade drill bit For wood
Flat drill bit
DBIT-FL-WO-L400MM-D35MM
Register now and access more than 125,000 products
Self-propelled threaded tip
Moves rapidly through the wood with minimal effort required on the user's part.
Two cutting edges
Fast penetration of the material with equally good drilling hole quality.
Excellent, rapid chip removal
Specially curved blade cleans the drilling hole to prevent tear-out from occurring.
Hexagon shank
No slippage of drill bit in the drill chuck.
Datasheets(X)
Medium hard woods, soft woods, fibreboards, chip boards and soft building materials such as gypsum plasterboard
Diameter | 35 mm |
Length | 400 mm |
Shank diameter | 1/4 in |
Last viewed
Countersunk head screw with hexagon socket, full thread
Hexalobular screw with flattened half round head
Knurled nut, high profile DIN 466, steel 5, zinc-plated, blue passivated (A2K)
Wire end ferrule with plastic sleeve
Counter nut, brass Metric according to EN 60423
Material lift box
Threaded fitting
Wet sanding paper, sheets Wet sanding paper, sheets
Low-cut safety shoes, S1P
Split pin