Special circular saw blade For non-ferrous metals
Special circular saw blade
CRCLSAWBLDE-MET-D250X80TOTHXBO30MM
Register now and access more than 125,000 products
Tooth shape
Trapezoidal tooth/flat tooth (TT/FT).
Machine
For table saws, panel saws or chop and mitre saws
Work materials
Profile and solid materials made from aluminium and other non-ferrous alloys, acrylic resin and Pertinax
Design
Positive rake angle for easier feed. Negative rake angle, especially suitable for thin-walled aluminium profiles. Due to the negative tooth shape, the workpiece is not drawn into the saw blade, but instead provides slight resistance and can therefore be better guided by hand.
Datasheets(X)
 | |
Diameter x saw cutting width/main blade thickness x drill hole | 250 x 3.2 / 2.2 x 30 mm |
Number of teeth | 80 PCS |
Tooth shape | Trapezium tooth/flat tooth |
Tooth geometry | Negative |
Material to be processed | Aluminium, Non-ferrous metal, Acrylic resin, Pertinax |
Side holes | Combi (2/10/60 - 2/11/63 - 2/12/64) |
Max. rotation speed | 7600 rpm |
Suitable for machine type | Mitre saws |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Mechanic's glove
Threaded rod DIN 976, A2-70 stainless steel, shape A
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Low-cut safety shoes, S2
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Eye bolt with full thread DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape LB
W-SLB system storage box
SC long twist drill bit DIN 338
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive