Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-F.WOCON-CS-L-TX30-8X100/80
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | L |
Nominal diameter | 8 mm |
Length | 100 mm |
Head type | Countersunk head |
Head diameter | 13 mm |
Head height | 4 mm |
Internal drive | TX30 |
Thread design | Full thread |
Thread length | 80 mm |
Core diameter | 5.3 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 21.700 g |
Last viewed
Thread die HSS DIN EN 22568 for standard metric ISO threads
4KS profile thumbturn cylinder
Plug-in mesh basket rack
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Bolt with head ISO 2341, shape B, A2 stainless steel, plain
City softshell vest
Hexagonal bolt with pin and small hexagon
Identification rings, PVC
Slotted flat-head screw DIN 85, A4-70 stainless steel, plain
Stud with threaded end ≈ 2d