Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-F.WOCON-CS-M-TX25-6,5X105/90
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | M |
Nominal diameter | 6.5 mm |
Length | 105 mm |
Head type | Countersunk head |
Head diameter | 10 mm |
Head height | 3 mm |
Internal drive | TX25 |
Thread design | Full thread |
Thread length | 90 mm |
Core diameter | 3.25 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 12.925 g |
Last viewed
Hammer drill bit Max Quadro-L Vario
Adapter Klingspor DZ 114
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick
Cylindrical pins with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper)
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
Akura 44 profile thumbturn cylinder