Special system screw For push-in connector
Special screw steel zinc plated yellow cs head TX
SPECSCR-WOCON-CS-XS/S-TX20-4,5X50/36
Register now and access more than 125,000 products
Depending on the connector type, the appropriate type of special system screws should be used as per ETA-12/0067 approval in order to guarantee the specified characteristic load-bearing values.
The specified characteristic load-bearing values are guaranteed by using the appropriate system screws with the respective connector in accordance with ETA-12/0067.
- The special system screws fit perfectly into the screw hole of the respective connector
- Half-tip ensures optimum initial screw bite and reduced risk of splitting through its pre-drilling effect
- Reinforced screw head
Datasheets(X)
To be used for connectors
 | |
Type description | XS/S |
Nominal diameter | 4.5 mm |
Length | 50 mm |
Head type | Countersunk head |
Head diameter | 7.5 mm |
Head height | 2.8 mm |
Internal drive | TX20 |
Thread design | Partial thread |
Thread length | 36 mm |
Core diameter | 2.6 mm |
Material | Steel |
Surface | Zinc plated yellow |
Product weight (per item) | 3.065 g |
Last viewed
Empty box For DIN 335 C countersink
Quick-action chuck with SDS-plus drive arbor
Twist drill bit HSCo8 WN MAGMA
Lambda sensor thread repair set Time-Sert
Tyre valve extension, plastic, slim
ASSY®plus VG 4 COMBI construction screw Steel zinc plated full thread hexagon head
Plastic cover cap with sealing lip for pan head screw
O-ring, metric
Welded stud
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A