Spherical washer for conical washer
DIN 6319 steel zinc flake, silver, type C
WSH-SPHR-DIN6319-C-(ZFSH)-D17,0
Register now and access more than 125,000 products
Due to the high degree of hardness, spherical washers according to DIN 6319 have a risk of hydrogen embrittlement when used in connection with zinc-plated surface coatings. The use of zinc-plated surface coatings is therefore not recommended. The ZFSH zinc flake system does not pose a risk of hydrogen embrittlement and offers the longest corrosion protection times compared to zinc-plating.
 | |
Standards | DIN 6319 |
Suitable for screw thread | M16 |
Internal diameter (d1) | 17 mm |
Form | C |
Outer diameter (d2) | 30 mm |
Thickness (h1) | 5.3 mm |
Material | Steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with shank
Work trousers
Synthetic corundum flap wheels
Multi-range clamp
EPS profile double cylinder
Wet/dry filter bag, fleece
Split pin DIN 94, steel, plain
Divider assortment With compartment rails and compartment dividers for system dimensions 16.8
HSCo8 end mill, short, centre-cutting DIN 844K
OrgaAer lock case
