Spherical washer for conical washer
DIN 6319 steel zinc flake, silver, type C
WSH-SPHR-DIN6319-C-(ZFSH)-D31,0
Register now and access more than 125,000 products
Due to the high degree of hardness, spherical washers according to DIN 6319 have a risk of hydrogen embrittlement when used in connection with zinc-plated surface coatings. The use of zinc-plated surface coatings is therefore not recommended. The ZFSH zinc flake system does not pose a risk of hydrogen embrittlement and offers the longest corrosion protection times compared to zinc-plating.
Datasheets(X)
 | |
Standards | DIN 6319 |
Suitable for screw thread | M30 |
Internal diameter (d1) | 31 mm |
Form | C |
Outer diameter (d2) | 56 mm |
Thickness (h1) | 11.2 mm |
Material | Steel |
Surface | Flake zinc silver |
ISO | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Spring band clamp DIN 3021, shape A, W.TEC
Screw-in part, tapered sealing EN1254, red brass, 4380
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Protective glove winter Ejendals Tegera 217
HSCo blue-ring machine tap for blind holes DIN 371/376
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Sisal/Cloth Ring
Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive