Spherical washer for conical washer
DIN 6319 steel zinc flake, silver, type C
WSH-SPHR-DIN6319-C-(ZFSH)-D6,4
Register now and access more than 125,000 products
Due to the high degree of hardness, spherical washers according to DIN 6319 have a risk of hydrogen embrittlement when used in connection with zinc-plated surface coatings. The use of zinc-plated surface coatings is therefore not recommended. The ZFSH zinc flake system does not pose a risk of hydrogen embrittlement and offers the longest corrosion protection times compared to zinc-plating.
Datasheets(X)
 | |
Standards | DIN 6319 |
Suitable for screw thread | M6 |
Internal diameter (d1) | 6.4 mm |
Form | C |
Outer diameter (d2) | 12 mm |
Thickness (h1) | 2.3 mm |
Material | Steel |
Surface | Flake zinc silver |
ISO | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Carpenter's pencil
Metal bow saw
Façade membrane STAMISOL PERFORM FI 2 TAPE
ASSY® 4 PH fittings screw Steel zinc plated full thread pan head
Hand guard For angle grinders
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Nozzle For cordless blind rivet gun
Starline Plus work dungarees
Low-cut safety shoes, S1P
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain