Split pin ISO 1234 A2 stainless steel
ISO 1234 A2 stainless steel, plain
SPLTPIN-ISO1234-A2-8X140
Register now and access more than 125,000 products
Used to secure axles and shafts to prevent slipping
Replaces DIN 94
Datasheets(X)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 140 mm |
Longitudinal external diameter of ring (b) | 16 mm |
Transverse external diameter of ring (c) | 15 mm |
Length between two pins of a splint (a) | 4 mm |
Standards | ISO 1234 |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
Screw with flattened half round head with collar and hexagon socket
K Plus insulation pipe clamp With separate insulation part
Sleeve, reduced with female and male thread EN10242 M4, hot-dip galvanised malleable iron
Hexagonal bolt
Plus Quadro-L Vario hammer drill bit
ATO resettable fuse For continuous operation (permanent installation) and fault finding (diagnostics)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Low-cut safety shoes, S1P
Installation power tool For thread inserts
Pan head tapping screws with recessed head ISO 7049, steel, zinc-plated (A2K)