Split pin ISO/WN 1234 steel zinc-plated
ISO/WN 1234 zinc plated steel
SPLTPIN-ISO1234-(A2K)-6,3X56
Register now and access more than 125,000 products
Nominal size d1 = 3.5 mm/4.5 mm/5.5 mm/7 mm not standardised according to ISO 1234
Replaces DIN 94
Datasheets(X)
 | |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 56 mm |
Longitudinal external diameter of ring (b) | 12.60 mm |
Transverse external diameter of ring (c) | 11.80 mm |
Length between two pins of a splint (a) | 4.00 mm |
Standards | ISO 1234 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Clamping screw for ISO D clamping system
Euro screw, countersunk head, type A
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A2 stainless steel, plain
Window handle ZD 402
T-shaped cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
T-handle 2-component TX with side drive
Impact insert
Front bracket AeroMount For 10° elevation when used as a front foot in S10 or OW10 systems, and when used as an end bracket in OW10 systems on flat roofs
Ratcheting TX double box-end wrench