Spring-loaded pressure piece with ball
Spring plunger, ball, steel
SPGPLNG-BAL-5.8-SPFO+-M12X26
Register now and access more than 125,000 products
- With normal and enhanced spring force
Spring-loaded pressure pieces are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Steel |
Property class | 5.8 |
Material of ball | Hardened steel |
Material of spring | Spring steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Thread type x nominal diameter (d1) | M12 |
Length (l1) | 26 mm |
Ball diameter (d2) | 8 mm |
Ball height (h1) | 2.5 mm |
Internal drive (s) | HS6 |
Spring force start (F1) | 66 N |
Spring force end (F2) | 120 N |
Design | Strengthened design |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Threaded fitting
City softshell vest
Safety boots, S4
Swivel bar For furniture locks
C 6.3 TX bit (1/4 inch)
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Hexagonal bolt with shank
Open-end plug-in torque wrench head drive Stahlwille 731/100
Support clip, type BA
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
