Spring plunger with ball
Spring plunger, ball, stainless steel
SPGPLNG-BAL-A1-M4X10
Register now and access more than 125,000 products
- Spring plungers are used for locking and as both hold-down and draw-off pins.
- With normal and enhanced spring force
Datasheets(X)
Spring plungers are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Stainless steel A1, 1.4305 |
Material of ball | Stainless steel C1, 1.4034 |
Material of spring | Stainless steel A2, 1.4310 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 10 mm |
Ball diameter (d2) | 2.5 mm |
Ball height (h1) | 0.8 mm |
Internal drive (s) | HS2 |
Spring force start (F1) | 4 N |
Spring force end (F2) | 10 N |
Design | Standard |
Last viewed
Twist drill bit HSCO DIN 338 SMART STEP
Hexagonal bolt with shank
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Complete printed Circo number plate holder
Hexagon socket set screw with pin ISO 4028, steel, 45H, zinc-plated, blue passivated (A2K)
Flat-head screw with Z cross recess ISO 7045, A2 stainless steel, plain
Hexagonal bolt with threading up to head ISO 4017, steel, strength class 8.8, zinc flake, silver (ZFSHL)
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Metal coils 4 mm With Powerglider
Drilling screw, mushroom head Steel, zinc-plated, blue passivated, AW drive