Spring plunger with ball
Spring plunger, ball, stainless steel
SPGPLNG-BAL-A1-M5X14
Register now and access more than 125,000 products
- Spring plungers are used for locking and as both hold-down and draw-off pins.
- With normal and enhanced spring force
Datasheets(X)
Spring plungers are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Stainless steel A1, 1.4305 |
Material of ball | Stainless steel C1, 1.4034 |
Material of spring | Stainless steel A2, 1.4310 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 14 mm |
Ball diameter (d2) | 3 mm |
Ball height (h1) | 0.9 mm |
Internal drive (s) | HS2.5 |
Spring force start (F1) | 6 N |
Spring force end (F2) | 11 N |
Design | Standard |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance f9
Double cylinder S5 locking system
Work trousers
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
Nylon Sanding Disc With reinforced nylon fleece
Countersunk head screw with hexagon socket ISO 10642, steel 12.9, plain
Jacket Planam Highline
SMART STEP EU+ HSCo twist drill bit DIN 338
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive