Spring plunger with head
Spring plunger, with head, steel
SPGPLNG-HD-ST-M10X26
Register now and access more than 125,000 products
- The cylinder head provides a defined installation position
Datasheets(X)
Spring-loaded pressure pieces are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Free machining steel |
Material of spring | Spring steel |
Material of ball | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Design | With head |
Thread type x nominal diameter (d1) | M10 |
Length (l1) | 26 mm |
Ball diameter (d2) | 6 mm |
Ball height (h1) | 2 mm |
Head diameter (dk) | 16 mm |
Thread length (lg) | 20 mm |
Internal drive (s) | HS5 |
Spring force start (F1) | 20 N |
Spring force end (F2) | 35 N |
Product weight (per item) | 17.520 g |
Last viewed
2C plastic adhesive Replast® ME 210 sec.
Neutral silicone
Hexalobular-type cheese head screw, low head
Work dungarees
G-fuse 5x20
Cable tie, type 3
Separating rail for multiple separation For 60 x 60 mm and 60 x 90 mm cable routing conduits
TIPP® A4 stainless steel pipe clamp 2 pieces
OrgaAer divider For angled tray
Hexagonal bolt