Spring plunger with thrust pin
Spring plunger, thrust pin POM, steel
SPGPLNG-PIN-(5.8/POM)-M4X15
Register now and access more than 125,000 products
Datasheets(X)
Spring-loaded pressure pieces are used as locking mechanisms as well as hold-down and lift-off pins.
 | |
Material of sleeve | Steel |
Property class | 5.8 |
Material of bolt | POM - Polyoxymethylene |
Material of spring | Spring steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Hexagon socket |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 15 mm |
Bolt diameter (d2) | 1.5 mm |
Bolt height (h1) | 1.5 mm |
Internal drive (s) | HS1.3 |
Spring force start (F1) | 5 N |
Spring force end (F2) | 16 N |
Design | Standard |
Product weight (per item) | 7.808 g |
Last viewed
Bit box equipped with bits 9 pieces
Drawer divider set, BASIC, 12 compartments
Furniture glider base module With pins for insertion, e.g. in upholstered furniture
STARLINE® waist jacket
Folding box
EPS profile thumbturn cylinder
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Stepped drill bit with stop ring
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8