Square spacer piece For beam clamp support clips type BG2
Spacer, type BG2
SPCEPCE-SQUAR-BG2-H24MM-(HDG)-M24
Register now and access more than 125,000 products
- Spacers extend the clamping length and
ensure that the support clip sits
perfectly on the flange - The spacers can be combined with one another
Can be used with type BK, BE1 and BE2
The spacers are inserted over the screw between the clamp and the mounting plate or component
 | |
Suitable for screw | M24 |
Internal diameter (d1) | 24.000 mm |
Length (l1) | 55 mm |
Width (b1) | 77 mm |
Thickness (h1) | 24 mm |
Material | Spheroidal graphite iron |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Countersunk tapping screw, shape C with hexalobular drive
MG-ZD 7 segmented-bow designer furniture handle Made from die-cast zinc
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
ASME B18.21.1 steel zinc-plated yellow
E30 fire protection duct angle piece
Refuse bag Without pull tie
Low-cut safety shoes S1 ESD
Accessories for identification rings
Cut-resistant gloves Ansell HyFlex 11-939
Low-cut safety shoes, S2
