Square spindle 8 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-ST-(ZN)-8X110
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Suitable for door handle | DH A 102 |
Material | Steel |
Surface | Zinc plated |
Length (L) | 110 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Electronic solder no. 10
Counterbore Ruko HSS TiN DIN 373 with straight shank and fixed pilot for thread core holes
Slotted cheese head
WÜPOFAST® zinc-plated yellow chipboard screw Steel, zinc-plated yellow, partial thread, countersunk head, PZ
Threaded fitting
Cut protection glove Hase Genua Dry 508535
Stud with threaded end ≈ 1.25 d