Square spindle 8 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-ST-(ZN)-8X115
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Suitable for fitting | 0 - not applicable |
Suitable for door handle | DH Nuevo |
Material | Steel |
Surface | Zinc plated |
Length (L) | 115 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Protective glove, knitted with nubs Ejendals TEGERA® 318
Sport Crux S1P ESD safety sandals
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 12.9, plain
Safety boots, S2
Helical insert W.TEC® INSERT COIL Free Running fine thread
Drawer divider set, BASIC KWB, 16 compartments
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Threaded rod DIN 976
4.8U, hot-dip galvanised
Hexagonal cap nut with clamping piece (non-metallic insert), fine thread DIN 986