Square spindle 8 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-ST-(ZN)-8X120
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Suitable for fitting | 0 - not applicable |
Suitable for door handle | DH Nuevo |
Material | Steel |
Surface | Zinc plated |
Length (L) | 120 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Slotted cheese head DIN 84, steel 4.8, plain
1/2 inch impact socket wrench insert For external TX screws, short
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Akura 44 profile thumbturn cylinder
Flat washer — large series ISO 7093-1 steel 300 HV, zinc flake silver (ZFSH)
HSCo keyway cutter DIN 850D
Flat washer with chamfer
Coil spring DIN 2098, steel, plain