Square spindle 8 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-ST-(ZN)-8X125
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Suitable for fitting | 0 - not applicable |
Suitable for door handle | DH Nuevo |
Material | Steel |
Surface | Zinc plated |
Length (L) | 125 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Case insert for MASTER/M-CUBE power tools
Concealed hinge, TIOMOS Impresso 120/-15 A With integrated damping, three damping settings available
Double cylinder S5 locking system
Hexalobular-type cheese head screw, low head ISO 14580, steel 8.8, zinc flake, silver (ZFSHL)
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Slotted cheese head DIN 84, steel 4.8, plain
Hexagon nut DIN 934, steel I10I, zinc-plated, blue passivated (A2K)
Screw-on fastening base
Twist drill bit HSS DIN 338 type RN 130°