Square spindle 8 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-ST-(ZN)-8X95
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Suitable for door handle | DH Nuevo |
Material | Steel |
Surface | Zinc plated |
Length (L) | 95 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Resettable fuse ATO set For continuous operation (fixed installation)
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Turnbuckle
Plate connector Deneb
Pallet shelf
Plastic multi-purpose anchor SHARK® Pro
Spring cotter pin With single loop. Zinc-plated steel, blue passivated
Screw extractor assortment 5 pieces
Door handle A 931
Screw fitting elbow angle 90°, metal thread, metric, PA6 MOP BS SGA