Square spindle 9 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-W.BR-ST-(ZN)-9X114MM
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 114 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Last viewed
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
FLEXEN® adhesive For FLEXEN® S2 rubber foam heat insulation, rubber foam refrigeration insulation plus, rubber foam refrigeration insulation, PE, PE stable, compact eccentric block
Angled washer 45° A2 oval hole
Handle plate on outer plate
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Twist drill bit HSCo DIN 340 type RN OXIDE
Vulcanised fibre disc Klingspor CS 561
Tension bushing DIN 1498, steel, plain, shape EG
Work jacket
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank