Square spindle 9 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-W.BR-ST-(ZN)-9X85MM
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 85 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Last viewed
HSCo8 end mill, short, centre-cutting DIN 844K
KALTSCHMELZ® device KSG-E For adhesive-free insertion of variably positionable plastic anchors into frameless lightweight panels
Screw hex. head with full thread
Screw plug GPN 710 For pipe thread
Hexagonal bolt
Furniture handle designer ZD 21
Pipe and fastening clamp Multifix
Hexagonal bolt
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Safety glasses uvex pheos cx2 9198