Square split spindle 10 mm offset on both sides to 8 mm
Square solid pin
SQUAR-SPIN-DRFRN-ST-OFFSET-10/8X135
Register now and access more than 125,000 products
- These square spindles can be used to install two door handles with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw expands the spindle in the handle.
 | |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 8 mm/10 mm/8 mm |
Length (L) | 135 mm |
Last viewed
Low-cut safety shoes, S2
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
Protective glove winter Ejendals Tegera 595
Trousers Stretch X
S1 safety boot Elten Anthony Mid ESD
Hammer drill bit Plus Quadro-S
Stretch X trousers
Work dungarees
Work jacket